Nakayama 024286, Owner'S Manual

Page: 3 / 23

3
WWW
.N
AKAYAMA
T
OOLS
.
COM
•
Always wear safety goggles for eye protection. Dress properly; do not wear loose clothing or jewelry that could become
caught in moving parts of the unit. Safe, sturdy, nonskid footwear should always be worn. Long hair should be tied back. It
is recommended that legs and feet be covered to protect from flying debris during operation.
• Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and any damage. Repair or replace as necessary before
using the machine. DO NOT USE any attachment with this power head other than the ones recommended by our company.
Serious injury to the operator or bystanders could result as well as damage to the machine.
• Always use proper handles and shoulder strap when cutting.
• Never attempt to make engine adjustments while the unit is running and strapped to the operator. Always make engine
adjustments with the unit resting on a flat, clear surface.
•
Do not use the unit if it is damaged or poorly adjusted. Never remove the machine’s guard. Serious injury to the operator or
bystanders could result as well as damage to the machine.
• Inspect the area to be cut and remove all debris that could become entangled in the nylon cutting head. Also remove any
objects that the unit may throw during cutting.
•
Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15 meters (50 FEET).
•
Never leave the machine unattended.
•
Do not use this unit for any job other than those for which it is intended as described in this manual.
• Do not overreach. Keep proper footing and balance at all times. Do not run the unit while standing on a ladder or on any
other unstable footing location.
• Keep hands and feet clear of the nylon cutting head or blade while unit is in use.
• Do not use this type of machine for sweeping away debris.
• Do not use the unit when you are tired, ill or under the influence of medication, drugs or alcohol.
•
Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit, stop the engine and check the nylon
cutting head. A broken or unbalanced nylon cutting head must never be used.
• Store in a locked, well-ventilated area only.
• Ensure safe and proper performance of your product. These parts are available from your dealer. The use of any other
accessories or attachments may cause a potential hazard or injury to the user, damage to the machine and void this
warranty.
• Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
• Stay clear of other workers or bystanders by at least 15 meters/50 feet.
• Whenever approaching an operator of the machine, carefully call his attention and confirm that the operator stop the
engine. Be careful not to startle or distract the operator which can cause an unsafe situation.
• Never touch the nylon cutting head or blade whenever the engine is running. If it is necessary to replace the protector or
cutting attachment, be sure to stop the engine and confirm that the cutting device has stopped running.
• The engine should be turned off when the machine is moved between work areas
• Be careful not to hit the nylon cutting head against stones, or the ground.
• Unreasonable rough operation will shorten the life of the machine as well as create an unsafe environment for yourself and
those around you.
•
Pay attention to loosening and overheating of parts. If there is any abnormality of the machine, stop operation immediately
and check the machine carefully. If necessary, have the machine serviced by an authorized dealer. Never continue to
operate a machine which may be malfunctioning.
• Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
• If you slip or fall to the ground or into a hole, release the throttle lever immediately.
• Be careful not to drop the machine or hit it against obstacles.
•
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark plug.
•
Make periodic inspections to assure safe and efficient operation. For a thorough inspection of your machine, please contact
a dealer.
• It is believed that a condition called Raynaud’s phenomenon, which affects the fingers of certain individuals, may be
brought about by exposure to vibration and cold. Loss of color and numbness in the fingers. The following precautions are
strongly recommended because the minimum exposure which might trigger the ailment is unknown.
•
Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.
• Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks and also by not
smoking.
• Limit the hours of operation. Try to fill each day with jobs where operating the brush cutter or other hand-held power
equipment is not required.
•
If you experience discomfort, redness and swelling of the fingers followed by whitening and loss of feeling, consult your
physician before further exposing yourself to cold and vibration.
• Always wear ear protection, loud noise for long time can make hearing debase even lost hearing.
• Wear a total face and head protection.