Nakayama 024286, Owner'S Manual

Page: 6 / 23

6
WWW
.N
AKAYAMA
T
OOLS
.
COM
Intended use
This machine can be used with the cutting wire as a trimmer for cutting grass and weeds of small thickness and in small
quantity and with the cutting blade as a brush cutter for cutting denser vegetation. This machine must not be used for cutting
or other cutting operations where the cutting tool must be lifted above the ground. This machine is only authorized for
private use. Any other use or modification of this machine is prohibited and involves high risks.
Technical Data
Voltage/frequency: 230V~50Hz
Input power: 1400W
No-load speed: 7500rpm (trimmer), 10000rpm ( θαμνοκοπτικό )
Cutting width: 42CM (trimmer), 25CM ( θαμνοκοπτικό )
Line diameter: 1.6MM x 5m
No. Description
1 Supply cable
2 Motor
3 Upper tube shaft
4 Harness support
5 Connector
6
Lower tube shaft
7 Carter of protection
8 Wire cutting line
9 Metal cutting blade
10 Angle drive
11 11. Handlebar support
12 12. Handle and handle
with switch on/off and
switch-lock release
button
13 13. Electrical wiring
14 14. Harness
15 15. Cutting head