Nakayama 024286, Owner'S Manual

Page: 2 / 23

2
WWW
.N
AKAYAMA
T
OOLS
.
COM
GB
Safety warnings
Safe operating practices
Training
a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the
age of the operator.
c) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
a) Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use,
disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do
not use the machine if the cord is damaged or worn.
b) Before use, always visually inspect the machine for damaged, missing or misplaced guards or shields.
c) Never operate the machine while people, especially children, or pets are nearby.
Operation
a) Keep supply and extension cords away from cutting means.
b) Wear eye protection and stout shoes at all times while operating the machine.
c) Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are away from the cutting means.
g) Always disconnect the machine from the power supply (remove the plug from the mains):
1. whenever the machine is left unattended;
2. before clearing a blockage;
3. before checking, cleaning or working on the machine;
4. after striking a foreign object;
5. Whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or
removable battery) before carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended replacement parts and accessories.
c) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach of children.
Recommendation
The machine should be supplied via a residual current device (RCD) with a tripping current of not more than 30 mA.
Additional instructions
Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. DO NOT EXPOSE
YOURSELF OR OTHERS TO DANGER.
Follow these general rules. Do not permit others to use this machine unless they are thoroughly responsible and have read,
and understand the machine manual and are trained in its operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
This product must be and operated by experienced users only. It is important that non experienced users get a full training
before using this tool
• If you give this machine to another person, please also provide it with this instruction manual.