![background image](http://html1.mh-extra.com/html/nakayama/010692/010692_translation-of-the-original-instructions_704548037.webp)
37
sockets reduce the risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators, ovens and
refrigerators.
There is an increased risk of
electric shock if your body is grounded.
c) Keep power tools away from rain or
humidity.
Water permeation into the power tool
will increase the risk of electric shock.
d) Use the cable solely for its intended
purpose. Do not use the cable to carry or hang
up the power tool or to pull out the plug from
the socket. Keep the cable away from heat,
oil, sharp edges or moving machine parts.
Damaged or twisted cables increase the risk of
electric shock.
e) When working outdoors with power tools,
only use extension cords which are suited for
outdoor areas.
Using extension cords suited for
outdoor applications reduces the risk of electric
shock.
f) If the operation of power tools in a humid
environment cannot be avoided, you must use
a residual current-operated device.
The use of
a residual current-operated device will reduce
the risk of electric shock.
4.3 Personal safety
a) Pay attention to what you are doing and use
power tools sensibly. Do not use power tools
when you are tired or under the influence of
drugs, alcohol or medication.
A single moment
of inattention while using power tools may cause
severe injury.
b) Wear personal protective equipment and
safety goggles.
Wearing personal protective
equipment such as a dust mask, non-skid safety
boots, a protective helmet or hearing protection
according to the type and application of the
power tool reduces the risk of injury.
c) Avoid starting the power tool
unintentionally. Make sure that the power
tool is switched off before you connect it to
the mains, pick it up or carry it.
If you have your finger on the switch when
you carry the power tool, or if the machine is
switched on when you connect it to the mains,
this may result in accidents.
d) Remove adjustment tools or wrenches
before switching on the power tool.
Tools or
wrenches in rotating machine parts may cause
injury.
e) Avoid abnormal body positions. Stand
securely and keep your balance at any time.
By doing so, you can control the power tool more
easily in unexpected situations.
f) Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose
clothing, jewellery or long hair may be trapped in
moving parts.
g) If dust extraction devices or collection bins
can optionally be attached, you must make
sure that they are mounted and correctly
used.
Using dust extraction devices may reduce
risks caused by dust.
4.4 Use and treatment of the power tool
a) Do not overload the machine. Use the
appropriate power tool for your type of work.
With appropriate power tools, you can work
better and more safely within the given power
range.
b) Do not use power tools with a defective
switch.
Power tools which cannot be switched
on or off are dangerous and must be repaired.
c) Pull out the plug from the socket and/or
remove the battery before you make settings
to the machine, replace accessory parts or
put aside the machine.
These precautionary
Summary of Contents for 010692
