background image

EN

G

LIS

H

17

Thank you for purchasing the High-Speed JIG Grinding Air Turbine Spindle " PLANET 600 ". This 
Air Turbine Spindle is designed for I.D. grinding and can be installed on milling machines, jig boring 
machines or special purpose machines. The Air Line Kit (with Lubricator) and a compressor are 
required to drive this Air Turbine Spindle. Read this and all the associated component Operation 
Manuals carefully before use. Always keep this Operation Manual in a place where a user can referred 
to for reference at any time.

CONTENTS

1. CAUTIONS FOR HANDLING AND OPERATION ·········································

P17

2. BASIC PACKAGE  ·················································································

P20

3. WARRANTY ·························································································

P21

4. CONTACT US ·······················································································

P21

5. FEATURES ···························································································

P21

6. SPECIFICATIONS AND DIMENSIONS ······················································

P22

7. REPLACING THE GRINDSTONE ·····························································

P23

8. REPLACING THE COLLET ·····································································

P24

9. CONNECTION TO THE AIR LINE KIT ·······················································

P25

10. BREAK-IN PROCEDURE ········································································

P26

11. CAUTIONS WHEN USING GRINDSTONES ················································

P27

12. DRESSING GRINDSTONES ( WA AND GC TYPE ) ······································

P28

13. USING THE ANTI-ROTATION BAR ···························································

P28

14. JIG GRINDING METHOD IN A VERTICAL MILLING MACHINE ······················

P29

15. CONFIRMING THE PART BORE DIAMETERS, COLLET DIAMETER AND 

GRINDSTONE DIAMETER ······································································

P31

16. TROUBLESHOOTING ············································································

P31

17. DISPOSAL OF THE AIR TURBINE SPINDLE ·············································

P33

CAUTIONS FOR HANDLING AND OPERATION

Class

Degree of Risk

  DANGER Existence of a hazard that could result in personal death or 

serious injury, if the safety precautions are not followed.

 WARNING

A safety hazard could result in bodily injury or damage 

to the device if the safety instructions are not properly 

followed.

 CAUTION

A hazard that could result in light or moderate bodily injury 

or damage to the device if the safety instructions are not 

followed.

1.

 Read these warnings and cautions carefully and only use in the manner intended.

 These warnings and cautions are intended to avoid potential hazards that could result in personal 

injury to the operator or damage to the device. These are classified as follows in accordance with 
the seriousness of the risk.

OM-K0679_PLANET600_(A5x)_EN_170710発注先変更準備(住所変更).indd   17

2017/07/18   13:55:30

Summary of Contents for PLANET600 Series





















Reviews: