EN
G
LIS
H
21
Thank you for purchasing the Ultra-Precision, High-Speed Brushless Motor Spindle " HES810 ". The
Brushless Motor Spindle is designed for use on machining centers without rotating the machining
center's main spindle, for small diameter drilling and milling. The E3000 CONTROLLER, Motor Cord
and Air Line Kit are required to drive this Brushless Motor Spindle. Read this and all the associated
component Operation Manuals carefully before use. Always keep this Operation Manual in a place
where a user can referred to for reference at any time.
CONTENTS
1. CAUTIONS FOR HANDLING AND OPERATION ··················································
P21
2. BASIC PACKAGE ···································································································
P24
3. WARRANTY ···········································································································
P25
4. CONTACT US ·········································································································
P25
5. FEATURES ·············································································································
P26
6. SPECIFICATIONS AND DIMENSIONS ··································································
P26
7. CHANGING THE TOOL ··························································································
P30
8. REPLACING THE COLLET ····················································································
P31
9. INSTALLATION INTO THE MACHINE ···································································
P32
10. CONNECTION TO THE CONTROLLER ································································
P35
11. CENTERING ALIGNMENT ·····················································································
P35
12. BREAK-IN PROCEDURE ·······················································································
P37
13. CAUTIONS WHEN USING GRINDSTONES AND TOOLS ····································
P38
14. TROUBLESHOOTING ····························································································
P39
15. DISPOSAL OF THE BRUSHLESS MOTOR SPINDLE ··········································
P40
CAUTIONS FOR HANDLING AND OPERATION
Class
Degree of Risk
DANGER Existence of a hazard that could result in personal death or
serious injury, if the safety precautions are not followed.
WARNING
A safety hazard could result in bodily injury or damage
to the device if the safety instructions are not properly
followed.
CAUTION
A hazard that could result in light or moderate bodily injury
or damage to the device if the safety instructions are not
followed.
1.
■
Read these warnings and cautions carefully and only use in the manner intended.
■
These warnings and cautions are intended to avoid potential hazards that could result in personal
injury to the operator or damage to the device. These are classified as follows in accordance with
the seriousness of the risk.
OM-K0587 002_HES810_(A5x18)_EN_150205.indd 21
2015/02/05 17:24:42
