36
①
ALIGNMENT INSTRUCTIONS
: To find machining center's main spindle center in relation to the
Brushless Motor Spindle, mount a tool in a high-precision endmill holder or collet.
Milling a cross pattern on the workpiece as described in Fig. 21.
②
Measure the center (Fig. 21).
③
Installing the Brushless Motor Spindle to the machining center's main spindle and mount the same
end-mill to the Brushless Motor Spindle.
With the main spindle of the machining center stopped, start the Brushless Motor Spindle.
Machine the cross pattern in the same way as the previously working mill (
①
), using the same
work material (Fig. 22).
Measure the difference in the X - Y cross.
If there is no difference in the measurement, an alignment is not necessary.
Spindle Taper
Tooling holder
Machining center's
main spindle
Fig. 21
Mill an X - Y cross pattern in a scrap piece of
material and measure the X - Y intersection.
Install the same end-mill to the Brushless
Motor Spindle.
Stop the machining center's main spindle, and
re-install the Brushless Motor Spindle.
Re-machine the cross pattern in the same way
as the previously milled (
①
), using the same
work material position (Fig. 22).
Measure the position difference in the X - Y
axis cross.
Brushless
Motor Spindle
Fig. 22
OM-K0587 002_HES810_(A5x18)_EN_150205.indd 36
2015/02/05 17:24:51
