107
English
3-3-4.
To set the Speed Point " 4 " (Motor No. 1), push the START / STOP Button (START /
STOP)
⑯
.
and
will be displayed alternately. The Speed Point " 4 " (Motor No. 1) can be
set.
Push the Motor Speed Adjustment Button (SPEED
,
)
⑮
to set motor rotation
speed.
3-3-5.
To set the Speed Point " 1 " (Motor No. 2), push the START / STOP Button (START /
STOP)
⑯
.
and
will be displayed alternately. The Speed Point " 1 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
,
)
⑮
to set motor rotation
speed.
3-3-6.
To set the Speed Point " 2 " (Motor No. 2), push the START / STOP Button (START /
STOP)
⑯
.
and
will be displayed alternately. The Speed Point " 2 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
,
)
⑮
to set motor rotation
speed.
3-3-7.
To set the Speed Point " 3 " (Motor No. 2), push the START / STOP Button (START /
STOP)
⑯
.
and
will be displayed alternately. The Speed Point " 3 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
,
)
⑮
to set motor rotation
speed.
3-3-8.
To set the Speed Point " 4 " (Motor No. 2), push the START / STOP Button (START /
STOP)
⑯
.
and
will be displayed alternately. The Speed Point " 4 " (Motor No. 2) can be
set.
Push the Motor Speed Adjustment Button (SPEED
,
)
⑮
to set motor rotation
speed.
3-3-9.
To set the Speed Point " 1 " (Motor No. 1), push the START / STOP Button (START /
STOP)
⑯
.
3-3-10. To finalize the settings, push the Error Reset Button (RESET)
㉑
.
After the settings have been finalized,
will be displayed.
4. To return to the
or
setting, push the Motor Speed Adjustment Button (SPEED
,
)
⑮
and
go to step 3-1 or 3-2.
5. To finish the settings, push the Error Reset Button (RESET)
㉑
.
6. After the settings are saved,
will be displayed followed by
.
7. To set other parameters, push the Motor Speed Adjustment Button (SPEED
,
)
⑮
.
8. To finish setting parameters, turn the Main Power Switch
⑨
OFF.
⑧
Selection of External Motor Start Signal Control Mode
Procedure
1. Push the START / STOP Button (START / STOP)
⑯
.
2.
is displayed. This indicates that motor startup and setting the rotation direction cannot performed
simultaneously.
3. Push the START / STOP Button (START / STOP)
⑯
.
4.
is displayed. This setting is clockwise rotation with motor startup by " Rotation Command (Pin No.
14 : START) " or left hand rotation with motor startup by " Rotating Direction Setting (Pin No. 2 : DIR_
IN) " can be set.
5. You can cycle through the choices by pushing the START / STOP Button (START / STOP)
⑯
.
6. Push the Error Reset Button (RESET)
㉑
to send the settings to memory.
followed by
will be
displayed.
