2
CAUTION
⑥
When using the motor for mass production, please purchase another motor as a spare in case of
emergency.
⑦
Drain and clean the air lter regularly. Water and dirt in the air lter may cause damage to the motor.
⑧
A lubricator is regulated to avoid drops in motor speed or decreasing motor life.
⑨
When the oil volume in the lubricator is low, this may cause damage to the motor life.
3 - 1 Specications
①
With the air system, the AM-2526/AM-H2526 has very low heat generation allowing for long term continuous
operation.
②
Silencer with the air motor keeps noise to a minimum.
③
The air motor housing is made from precision ground, hardened, stainless steel (SUS) with an outside
diameter of
ȭ
25mm (AM-2526) /
ȭ
25.4mm (AM-H2526).
CAUTION
The standard length of air inlet hose is 2m, and outlet air hose is 1m. When the hose is longer
than the standard length, the rotating speed is decreased.
2
. FEATURES
3
. SPECIFICATIONS AND DIMENSIONS
Model
AM-2526 (R / L)
AM-H2526 (R / L)
AM-2526 (RA / LA)
AM-H2526 (RA / LA)
Appropriate Air Pressure
0.3
〜
0.5MPa
Motor speed
(At
0
.
5
MPa air pressure)
24,000min
-1
22,000min
-1
Air Consumption
205N
ℓ
/min
170N
ℓ
/min
Hose Diameter
Inlet I.D.
ȭ
4.5mm
×
ȭ
O.D.
ȭ
6.7mm 2m
Outlet I.D.
ȭ
5.5mm
×
ȭ
O.D.
ȭ
7.5mm 1m
Inlet I.D.
ȭ
4.0mm
×
ȭ
O.D.
ȭ
6.0mm 2m
Outlet I.D.
ȭ
5.5mm
×
ȭ
O.D.
ȭ
8.0mm 1m
Standard Accessories
AM-2526 (R / L)
・
AM-H2526 (R / L)
AM-2526 (RA / LA)
・
AM-H2526 (RA / LA)
・
Silencer (K - 208)
・・
1pc.
・
Hose (K- 204
：
Air Inlet 2 m , Air Outlet 1 m)
・・
1pc.
・
Filter Joint (FJ - 02)
・・
1pc.
・
Silencer (K - 209)
・・
1pc.
・
Hose (K - 215
：
Air Inlet 2 m)
・・
1pc.
・
Hose (K - 216
：
Air Outlet 1 m)
・・
1pc.
・
Filter Joint (FJ - 01)
・・
1pc.
・
Wrench (22
×
27)
・・
1pc.
・
Operation Manual
・・
1set.
※
The Silencer and Filter Joint are attached to the Hose.
