Page | 34
HUMSTART
– Length in milliseconds in which the hum starts playing
before the end of the extension sound
. For
example, if the extension sound is 1,000ms (1 second), and this is set to 400ms, then the extension will play 600ms
before the hum starts.
VOLHUM
– Volume for the hum sounds. Values go from 0 to 16, 0 being completely off and 16 being full volume.
VOLEFF
– Volume for the effect sounds. Values go from 0 to 16, 0 being completely off and 16 being full volume.
5.5.7.
ACCENT
Accent settings tab. Unlike Igniter™ which has complicated accent settings, Spark 3™ has simple drop-downs to run
the accents. This allows for easy setup and ensures a nice pattern.
To change the accent pattern for each mode, simply choose the pattern from the drop down for that mode. To see
the pattern in the simulator, make sure that the desired mode is chosen from the Accent mode dropdown, which
in the NEC Editor is right above the 8 accent LEDs, above the start and stop buttons for the accent portion of the
simulator.
Figure 26 – Screenshot of the Accent tab. Use the individual dropdowns to set each effect. The dropdown is used to indicate to the simulator
which one should be running in the simulator for inspection.
