Page | 33
BLSTLEN
– Length (in milliseconds) for the blast effect to play. Setting to zero matches the length of the file.
NIMPTBLAST
–Applicable only when using a WS2812 (NeoPixel) blade. This setting defines the size for the Impact
Blast™ feature. This value should be between 0 and half the length of the blade, as it defines where the impact
range should occur from the middle. Setting to zero (0) will disable the feature.
New in R4
BLASTSHADE
– Defines the color variance for the blaster block effect. Higher values allow more
variance in the color; lower values make it more static like the defined color. Recommend is twenty four (24) for
blast.
5.5.6.
AUDIO
The audio tab contains some settings directly related to the audio. These settings are described in detail below.
Figure 25 – Screenshot of the Audio tab.
LINEAR HUM/IN/OUT
–Enable this setting to have the hum, extension, and retraction sounds play in order as they
appear on disk instead of being random order.
LINEAR ACTION
–Enable this setting to have the swing, slash, clash, blast, and lockup sounds play in order instead
of being randomly selected.
