Page | 38
Rotate saber +
Aux button
NA
AUX+/-
Rotate
Hold
Holding the Aux button and then performing the rotation
action will engage Multiphase™. Rotation clockwise/counter
clockwise will go forward and backwards through the fonts.
Hit saber/Blade CS
Clash
Hitting the saber against something or hitting your hand on
the hilt will cause the Clash sound to play. To return to
running simply wait for the clash to finish.
Main Button
MAIN+/-
Hold/Unlatch Holding or unlatching the main button will cause the
retraction sound to play and then the saber will return to Idle
mode.
6.3.
SABER CINEMA™
For any font with Saber Cinema™ engaged, holding the aux button for one second will engage the Saber Cinema™
player. Once Saber Cinema™ is engaged, the interactivity will be as described in the following subsections.
In Igniter 3™, all the tracks files are stored off the root in the
/TRACKS
folder. This means that ever font will be able
to play the tracks, so it is not required to navigate to a certain font to play tracks. However, to allow for a
customizable experience for each font, the starting track can be selected by using the
TRCKSTRT
parameter. See
4.5.6 Audio
for more info.
6.3.1.
SABER CINEMA™ INTERACTIVITY
The following table describes the interactivity for Saber Tracks.
Entry
Label
Action
Description
Aux Button
AUX +/-
Press
Advances to the next track. When the last track file is reached
it goes back to the beginning.
Main Button
MAIN +/-
Press/Latch
This button will activate the saber, allowing you to have full
light saber capabilities while the saber is running.
Main Button
MAIN +/-
Hold/Unlatch If the saber is running it will put it back into normal Saber
Cinema™ operation with the music playing.
Aux Button
AUX +/-
Hold
Puts the saber back into normal idle mode for the current
font.
6.4.
SABER APPS™
Saber Apps™ is the exciting way to run multiple different applications on your saber. This opens up an entirely new
experience that was never before possible with sabers, allowing apps for configuration, games, and even new
saber experiences. Many apps; one Igniter™.
To enter the Saber Apps™ menu, simply point the saber down and hold the aux button during the menu of any
other app (except for the Motion Editor app, which automatically goes back to the Saber Apps™ menu when the
configuration is saved). You will then hear the “Saber apps menu sound”. Operation of the Saber Apps™ menu is
very similar to the normal Igniter™ menu. The interactions are shown in the table below.
Entry
Label
Action
Description
Aux Button
AUX +/-
Press
Advances to the next app. When the last app file is reached it
goes back to the beginning.
