Version 2 March-2015
Pag. 14
Instruction manual 55152xxx
2. DESCRIPTION
General
1.1 Pan
1.2 Digital display
1.3 RS232 output
1.4 Socket
1.5 Bubble level
1.6 Screwed legs
Display digital
2.1 CAL: calibration
2.2 UNIT: selection of the weighing unit
2.3 PCS: piece counting function
2.4 TARE
2.5 ON/OFF/PRINT
2.1
2.2
2.5
2.4
2.5
CAL
SERIE 5152
UNIT
TARE
ON/OFF
COUNT
1.1
1.2
1.5
1.4
1.5
1.6
Version 2 March-2015
Pag. 19
Instruction manual 55152xxx
Never try to repair the balance by yourself, since you will lose the warranty and may
provoke damages to the general operating system or the electrical installation, as well as
injuries to the people that usually handle the equipment (burns, hurts…).
Try not to spill any liquid on the control panel, though it is properly insulated. In case
you have any doubts do please immediately unplug the equipment (see Maintenance).
Made under the European regulations for electrical security, electromagnetic compati-
bility and security on machines.
6. MAINTENANCE AND CLEANING
To get the best results and a higher duration of the balance it is essential to follow the
processes of use.
Note: All the processes of use mentioned below will not have any value unless you keep
a continued and careful maintenance.
Please follow the processes of use of this manual.
This manual should be available for all users of this equipment.
Prevent the balance from sudden movements and knocks, as well as from direct sun-
light or air flows. The balance is a precision instrument, you must handle it carefully.
The balance is supplied with an adapter. It has to be plugged to an earth connection and
the socket should be handy and ready to unplug the equipment in case of emergency.
Never unplug the adapter by pulling the wire, do it from the base.
Never use the balance in a wedged location as for example a shelf.
Never use sharp objects as pens, etc… to press the buttons of the control panel; only use
your fingers.
Never place on the pan an object heavier than the maximum capacity of the balance, the
sensor could be damaged.
Neither submerge the balance nor spill liquids on it.
If you use batteries, remove them when you are not using the balance for a long period
of time.
If any liquid comes into contact with the electric parts of the balance please do imme-
diately disconnect it from the net and send it to the technical service, as soon as possible,
for its checking and adjustment.
Always use original components and supplies. Other devices can be similar but they
can damage the equipment.
Cleaning
Never use scourers or substances that can grate for cleaning metallic parts such as stain-
less steel, aluminium, coatings, etc. as they damage the balance and produce an early
ageing of the equipment.
ENGLISH
ENGLISH
