5
Nagra –
JAZZ
Installation
Positioning
In order to protect against the risks of fire and electric shock, please keep this
device away from rain and humidity, use exclusively indoors.
The positioning of the JAZZ must allow free access to the ventilation slots located
under the device.
The Nagra JAZZ must rest on a stable support. We recommend that you use the
anti-vibration support, Nagra VFS, Vibration Free Support, developed by Nagra
consisting of isolated massive aluminum plates using the same silicon base
damping material as the Nagra CD mechanics.
Connecting the ACPS II power supply
Place the front panel selector in the
OFF
position. Insert the LEMO plug from the
ACPS II power supply into the DC connector of the Nagra JAZZ.
The LEMO plug features a red dot that must be facing
upwards for correct insertion into the power input
connector.
You will hear a click, indicating that the plug is
securely locked in.
After connection of the LEMO plug, connect the ACPS
II to the mains via the IEC cable.
Illumination of the ACPS II's red LED (Light-Emitting Diode)
indicates the output of direct current. If the LED is off, check
the connection of the IEC mains cable and the delivery of
current to the mains plug.
To disconnect the LEMO plug.
Hold the fluted section of the plug as
shown in the picture and pull backwards.
