10
Nagra –
JAZZ
Remote control
The JAZZ comes with a new remote control.
You may also use Nagra RCU or RCU II remote control. As they use a different
communication protocol, please contact your Nagra dealer to make the necessary
adjustments inside your JAZZ.
Using a “universal remote” with the JAZZ
The JAZZ responds to IR (Infra Red) signals coded in Philips RC-5 format. The
JAZZ is allocated a system number 16 for preamplifiers.
Should you wish to program your universal remote control, please use the
following table:
Code
Function
1 to 5
Input
A
to
E
(code 6 or input
F
is not active on the JAZZ)
32 & 33
Input change step-up or step-down
16
Volume Up
17
Volume Down
26
Balance Right
27
Balance Left
13
Mute
12
Standby
Left balance
Increase volume
Right balance
Decrease volume
Mute
Operation LED
(will blink when a
button is pressed)
Standby
Input block
A to E
