6
Nagra –
JAZZ
Connection block
1.
Input block (
A
is only symmetrical with the transformer option*),
others are asymmetrical on WBT nextgen RCA connectors
2.
BYPASS input on XLR, this is a special input that will be routed to the
XLR output when the JAZZ is OFF, see
BYPASS
on page 8)
3.
Output
1
is on XLR (symmetrical on Nagra balancing transformers) and
RCA outputs on Output
2
, the RCA can be used in parallel
4.
Serial number identifier
5.
Ground connector
6.
DC input on Lemo plug
*The XLR inputs, input
A
are asymmetrical. If you need symmetrical inputs, you
should purchase the optional input transformers. Just like the output
transformers, they are custom designed for the JAZZ and hand wound by Nagra
in Romanel-sur-Lausanne, Switzerland. This option will be available shortly.
In order to obtain optimal performance from the Nagra JAZZ, it is preferable to
leave the device switched on for about 15 minutes before use, so that the internal
components can reach their optimum operating temperature.
Like all tube electronic devices, the Nagra JAZZ needs a running-in period. It will
reach peak performance after a few hundred hours operation.
Note about the Ground connector
This feature is seldom used but often handy to solve specific setup issues. Your
Nagra dealer will assist you on when and how to use this connector.
1.
3.
2.
4.
5.
6.
