Nagasaki PC104-688VL, User Manual

Page: 34 / 72

NAGASAKI IPC
28
Floppy Drive Swap
The field reverses the drive letter assignments of your floppy disk drives in the Swap A, B
setting, otherwise leave on the default setting of
Disabled (No Swap). This works
separately from the BIOS Features floppy disk swap feature. It is functionally the same
as physically interchanging the connectors of the floppy disk drives. When the
function’s setting is <
Enabled> , the BIOS swapped floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes Drive A under DOS.
Available options: Disabled, Enabled
Default setting: Disabled
Floppy Drive Seek
This field is used to set if the BIOS will seek the floppy <A> drive upon boot.
Available Options: Disabled, Enabled
Default setting: Disabled
PS/2 Mouse Support
The setting of
Enabled
allows the system to detect a PS/2 mouse on boot up. If
detected, IRQ12 will be used for the PS/2 mouse. IRQ 12 will be reserved for expansion
cards if a PS/2 mouse is not detected.
Disabled will reserve IRQ12 for expansion cards
and therefore the PS/2 mouse will not function.
Available options: Disabled, Enabled
Default setting: Enable
System Keyboard
This field specifies if an error message should be prompted when a keyboard is not
attached.
Available options: Absent, Present
Default setting:
Absent
Primary Display
The field specifies the type of monitor installed in the system.
Available options: Absent, VGA/EGA, CGA40x25, CGA80x25, and Mono
Default setting: Absent