S3600 Series Installation Guide
Initial Startup after Power on of Switches
NADDOD Pte. Ltd.
17
Figure 3-5
Setting of Terminal Emulation from the “Network Properties” Interface
CAUTION
Please use the attached DB-9 to RJ-45 cable to avoid incompatibility.
3.3 Setting up Port Parameters (SecureCRT)
Step 1
Install SecureCRT software on PC;
Step 2
Setting up SecureCRT terminal parameters:
1. Click “
Quick Connect
” button to enter the “quick connect” window.
Figure 3-6
Create A Quick Connect
2. Choose “
Serial
” protocol.
