S3600 Series Installation Guide
Installation Guide
NADDOD Pte. Ltd.
11
Figure 2-4 Schematic Diagram after Installing Switch onto Chassis (with Tray)
2.2.3 Installing Switch on the Table
Most users have no 19-inch standard chassis. The common practice in such case is to place
switch on a clean workbench. This is simple, and only the following matters must be kept in
mind:
The workbench must be stable and grounded properly.
A space of 10cm must be left around the switch for cooling.
Don’t place heavy objects on the switch.
The equipment comes with four foot pads. Please paste the pads on the bottom corners of
the switch, as shown in the figure below:
