S3600 Series Installation Guide
Installation Guide
NADDOD Pte. Ltd.
6
2
Installation Guide
2.1 Preparation before Installation
2.1.1 Safety Warning
To prevent personal injury caused by equipment trouble due to improper use, please keep in
mind the following:
The power cable must be unplugged before cleaning the switches. Don’t wipe the
switches with wet cloth, nor clean the switches with liquid.
Don’t put the switches beside the water or in wet place, and dampproof measures must be
taken for the chassis of switches.
Don't put the switches on an unstable box or table, which may cause serious damage to
the switches in the case of drop.
Good room ventilation must be ensured and the air holes of the switches must be kept
unblocked.
The switches can works normally with correct voltage only. Please confirm that the
operating voltage is consistent with the voltage marked on the switches.
To lower the risk of electric shock, please don’t open the chassis during the operation of
the switches. Don’t open the chassis at will even in the case of power off.
Be sure to use antistatic gloves when making replacement of interface conversion board
to prevent electrostatic damage.
2.1.2 Pre-installation Check
To ensure a normal work environment of switches, S3600 Series Switches have the following
requirements for the operational site:
Be sure to leave space at the air intake vent and ventilation opening of switches to
facilitate switches chassis cooling.
Make sure that the chassis and workbench are provided with a good ventilation and
cooling system.
Make sure that the chassis and workbench are sufficiently secure to support the weight of
switches plus the installation accessories.
