PixelClear
Auto brightness
PixelClear Brightness settings
Your TV is equipped with a light sensor that constantly measures the ambient
light, calculates and regulates to the appropriate brightness. This results in
optimal picture quality, whether it is very light or very dark.
You can also choose to adapt the brightness manually in 7 steps.
Autobright
Activate autobright:
1. Press
EXIT
+ consecutively -> Your TV will accept with 5 fast blue
blinks in the speaker area.
The TV measures the light in the room and sets the appropriate brightness.
The lightsensor measures continuously and adjusts the brightness once in a
while.
On top of this automatic brightness regulation, you can still finetune the
brightness and the contrast individually for every source, by pressing the
PIC
(picture) key.
Remark: Autobright is not activated when you watch the first time. Autobright
can also be activated by a B&O remote control .
Autobright is not active on VGA, DVI and Component P-scan.
Deactivate autobright:
1. Press
EXIT
+ consecutively -> Your TV will accept with one blue blink
in the speaker area.
Manual regulation
You can decide the appropriate brightness and contrastlevel yourself:
Press
BRIGHT
and choose one of the seven levels using the
BRIGHT
key.
The present brightness level is shortly shown on your TV:
Dark 1
It is totally dark in the room
Dark 2
It is dark in the room
Dark 3
There is a bit of light in the room
Normal
Normal light conditions
Bright 1
It is daylight, cloudy
Bright 2
It is daylight, bright room
Bright 3
It is daylight, strong sunlight and big windows
30