Adjust the sound using Volume, Balance og Equalizer in the OSD
menu.
1. Press
MENU
to activate the menu
2. Press and select "SOUND" from the main menu
3. Press
GO
to enter the "SOUND" menu
Under ”VOLUME” in the submenu, use and
to adjust the
soundlevel. Volumelevel goes from 0 to 100. You can off course as
well use the volumekeys on the remote control. In the low area,
volumel adjustments are small.
OSD
Sound adjustment
Sound
AUTO Volume Justering (AVC)
AVC is efficient in order to keep the same volume level when
changing channels. Use and
GO
to select "AVC MODE".
Use to select "ON" or "OFF".
4. Press
EXIT
to leave the menu.
EQUALIZER set-up
Select a sound mode
Balance adjustment
Volume adjustment
You can only change the Equalizer setting, if the "SOUND MODE" is
”USER". In "EQUALIZER" in the submenu, you can use
together with
GO
. You can select a frequency and change the
settings with
. The spatial efftect can be adjusted
under "SPATIAL". From 51 you have spacial effect in stead of
stereo effect.
Use and
GO
to use the ”Sound mode”. Use or to
select the pre-programmed sound modes. You can choose between
"NORMAL", "CINEMA", "NEWS", "FLAT" og "USER".
Use and
GO
to select ”BALANCE”. Use or to
adjust the balance between left and right. You can select a value
between - 50 til + 50
29
EQUALIZER
120 Hz
50
500 Hz
25
1.5 kHz
42
5 kHz
33
10 kHz
63
SPATIAL
50
UP DOWN LEFT RIGHT EXIT
LYD
MENU UP DOWN EXIT
VOLUME
10
BALANCE
0
SOUND MODE
User
EQUALIZER Press GO
AVC
On
