RF TV fine tuning
TV channel selection
RF TV fine tuning
1. Select TV
2. Press
Menu
3. Select "TV SETUP" in the main menu using the navigation keys
4. Press
Go
5. Select "FINE TUNE"
6. Press
Go
7. You can finetune the channel using
or
Recommendations to reduce RF TV noise:
A)
Use an antenna signal booster.
B)
Use the picture format
TV mode
, to obtain the best picture quality.
C)
Some channels have a bad signal, resulting in a picture with noise.
The picture can often be improved by finetuning the channel in the
PICTURE menu. Reduce the value under ”FINE TUNE” from 50 til 45.
D)
You can also try to reduce the sharpness from level 60 to 20 or
even 0 in the PICTURE menu.
E)
If all of the above doesn’t work, try to decrease the contrast from 50
to 40.
F)
Use a 75 ohms low capacity cable, or make the cable shorter.
G)
The quality of a PAL signal is limited. Picture quality is always
dependent of the quality of the signal, quality of the source, etc.
27
BRIGHT
TIME
V. SIZE
PRE CH
AMP
DVD
Picture
MENU UP DOWN EXIT
BRIGHTNESS
50
CONTRAST
40
COLOR
50
SHARPNESS
0
TEMPERATURE
Normal
RECALL
Press MENU/GO
TV SETUP
MENU UP DOWN EXIT
AUTO SCAN
Press MENU/GO
MANUAL SCAN
Press MENU/GO
FINE TUNE
45
EDIT
Press MENU/GO
SYSTEM
B/G D/K I
