233969 / 01/13 (A20)
15
Regular Maintenance
AlWAyS ENSURE tHAt tHE bAttERy IS dISCONNECtEd
PRIOR tO ANy MAINtENANCE OPERAtION
!
!
After use, empty waste-water tank using
emptying hose and flush-out with clean
water.
A
Remove the two hoses to disconnect the separator from the
machine (Fig 28).
Lift off the separator. The separator has a sealing-rubber
which should be examined at every clean-down (Fig 29).
Rinse using clean water.
NOtE:
Avoid over tightening the clean water draining cap.
The TTB 516 has been designed with ease of use in mind, this included easy stripping-down and cleaning.
Remove the two filters clipped into the separator and flush with clean water (Fig 30)(Fig 30a).
Replace by fitting the rear of the filter first then clipping the front to lock in place (Fig 31) (Fig 32).
Disconnect and remove the
battery before proceeding with
tank removal (Fig 33).
Once emptied the top
waste-water tank can simply be
lifted off. (Fig 33a).
The clean-water tank can be drained via the yellow cap fitted
to the left hand side of the machine. The cap has a rubber
seal and might require a spanner to remove. (Fig 34).
Fig 28
Fig 29
Fig 30
Fig 31
Fig 32
Fig 33
Fig 34
A
Fig 30a
Fig 33a
