233969 / 01/13 (A20)
10
Machine Set-Up
The TTB 516 is equipped with a large 5 US Gallons clean-water tank allowing large areas to be cleaning in a
single fill.
Filling the clean-water tank
To fill the clean-water tank, remove the filler cap (Fig 10).
Fill using either a hose, bucket or a suitable container. (Fig 11).
Note.
Great care must be taken to ensure that contaminants (leaves,hair, dirt, etc) are not allowed to enter the
clean-water during the filling process.
If using a bucket or similar, ensure it is always clean and free from debris.
Fill level Indicator
Fill the clean water tank to a maximum of 5 US Gallons, including cleaning chemicals if required.
Follow chemical manufacturing guide lines.
This allows the machine to be tipped back and moved without spillage (see page 12).
Use the fill indicator
(Fig 12).
Showing the clean-water tank full
(Fig 13a).
Fig 10
Fig 11
Fig 12
Fig 13
Fig 13a
Showing the clean-water tank empty
(Fig 13).
