NAC Image Technology ST-839 Page 229 User Manual Download

Page: 229 / 370

Date and Time Settings

Sets the date and time. The date and time can be saved as data for the recorded video.

8-9

(00400)

■

Set the Date and Time

１

Access the SYS MENU

(



3-11)



Access TOP MENU

＞

SYS MENU from the STOP mode.

２

Select DATETIME with the up/down
arrows and press the SET button



Use the up/down arrows to move to the
selected item (reverse display), select
DATETIME and press the SET button.



Press the SET button to input the date and
time.

３

Input the date/time and press the SET
button



Use the left/right arrows to move columns and
increase or decrease the value with the
up/down arrows.



Two columns can be input for the year, month,
day, hour, minute and second.



The time uses a 24 hour clock.



Press the SET button to set the date and time.

Summary of Contents for ST-839



















































































































































































































































































































































































Search results

Summary of Contents for ST-839

Reviews:

Related manuals for ST-839

Brands by name

Popular brands

NAC Image Technology ST-839, User Manual

Search results

Summary of Contents for ST-839

Reviews:

Related manuals for ST-839

Brands by name

Popular brands