NAC Image Technology Memrecam Q1v, User Manual

Page: 88 / 102

System Control
System Control
■ Status LED
CAMERA
Camera Mode Display Orange ： REC mode (during camera image memory recording
after camera image output and trigger detection)
Blue ： STOP/READY mode (memory image output. Playback
or transmission mode immediately after startup)
White ： VIEW mode (keeps the camera image output and
contents recorded in the memory)
Magenta ： ARM mode (deletes the camera image output and
contents recorded in the memory and records the
camera image in the memory)
Not lit ： Power OFF or starting up
Flashing ： Set to the EST mode and EST pulses are being input.
Only for VIEW, ARM, REC modes.
STATUS
Displays power ON, fail status Lit green ： Power ON, normal state
Lit red ： Power ON, fail status (when camera starting up,
malfunction detected, abnormal power voltage
detected, rise in sensor temperature detected, or
abnormal settings detected)
Not lit ： Power OFF
ETHERNET
Displays Ethernet connection
status Lit green ： Network connected
Flashing green ： Communicating with network
Lit orange ： Linking with 1000BASE-T
Not lit ： Network not connected or power OFF
※ If transmitting by linking with 1000BASE-T, the orange is lit and
the same LED flashes green, but the flashing green is darker than the
lit orange so it is difficult to see.
4-14
(00375)