NAC Image Technology Memrecam Q1v, User Manual

Page: 57 / 102

Using the Low Light Function
Using the Low Light Function
There are times when a clear and crisp live image cannot be obtained in the VIEW mode with the set
frame rate. Use the low light function to display an image that is brighter than the image filmed
with the set frame rate, and easily check the angle of view and the focus.
The low light function is only enabled for the image display in the VIEW mode. The image display during the
ARM mode or the REC mode as well as the actual image recorded is not affected. The actual image is filmed at
the set frame rate.
■ Enable the Low Light Function
１
Access the VIEW mode

Switch to the VIEW mode (

A
3-10).
2
Click the low light button.

This enables the low light mode.
3-17
(00375)