NAC Image Technology Memrecam Q1v, User Manual

Page: 86 / 102

Recorder
■ Live Image Output
Output Method PC live output with Ethernet GigE Vison
Raw data of images the PC receives from MEMRECAM is converted to
images for display
Refresh Rate Depends on the network status between the MEMRECAM and the PC as
well as the recording resolution
・ About 5 frames/sec When the display resolution is1280x1024
・ About 20 frames/sec When the display resolution is 680x480
■ Recording Conditions
Recording Start Conditions ARM Command (ARM from HXLink or such)
Recording End Conditions Recording Trigger Vibration (IF connector TRIG IB)
REC Command (REC from HXLink or such)
■ Recording Trigger Mode
Normal Trigger Normal recording trigger
■ Trigger Timing
START The trigger point is about 5% before the beginning of the recording
memory
CENTER The trigger point is the center of the recording memory (About 50 ％ )
END The trigger point is about 5% before the end of the recording memory
CUSTOM The trigger point is at a preset value (-100 ～ 100%) , set at 1%
intervals
4-12
(00375)