Page 19
www.NabcoEntrances.com
05-11-10
Acuvision Instruction Manual
D.6.8) Reflected light
Too much reflected light off the floor may reduce the sensitivity
causing the Acuvision to malfunction. Adjust sensitivity accordingly.
D.6.9) Precipitation interference
If the Acuvision is installed in a place where rain or snow falls on it,
ghosting or damage to the sensor may occur. In this case, use
Acusensor Rain Cover (P/N 14-10278).
D.6.10) Changes in background conditions
If the background condition within the infrared detection area
suddenly changes due to a strong snowstorm, the Acuvision could
ghost. In this circumstance, lower the sensitivity or choose the
Snow mode. After the sensor is set to Snow mode, make sure the
detection area is properly set. (See pages 16 in
this Instruction Manual.)
Within 118”
DN0192
