16
Serial Interface
The 608MFX provides an EIA-232 interface accessed via a 9 pin male
connector (labeled V24 on the unit). This is used to access the Command Line
Interpreter (CLI). Functions include setting the IP address, and other parameters
(see Network Management users guide). The pinouts are shown below:
Standby-Sync Port
A 9-pin female connector is used to connect the standby unit to the redundancy
manager for redundant standby coupling. The casing of the connector is
electrically connected to the chassis of the 608MFX.
DSR Pin 6
RTS Pin 7
CTS Pin 8
Pin 9
Pin 1
RXD Pin 2
TXD Pin 3
DTR Pin 4
GND Pin 5
Stby_In- Pin 6
Pin 7
Pin 8
Stby_Out- Pin 9
Pin 1
Pin 2
Pin 3
Pin 4
St Pin 5
