13
Port LED’s
The Display Mode is indicated by the LED pair labeled “Display Mode”, and the
state is given by the legend on the front of the 608MFX. To transition between
these Display Modes, the Select/Set button must be pressed briefly (similar to left
mouse click). The four states are: Port Status, 100Mbit/s, Full Duplex, Fault Mask.
Display Mode:
State = Port Status
Meaning
OFF
No Valid Connection to the port.
Green
Valid Connection to the port (good link).
Flashes green once per cycle, port switched to
standby
Flashes green three times per cycle, port is disabled
by configuration.
Yellow
Indicates Port is actively receiving data
Display Mode:
State = 100 Mbps
Meaning
OFF
Port operating at 10 Mbps
Green
Port operating at 100 Mbps
Display Mode:
State = Full Duplex
Meaning
OFF
Port operating half duplex
Green
Port operating full duplex
Display Mode:
State = Fault Mask
Meaning
OFF
Port is not currently monitored
Green
Port is currently monitored
