N-Com BX5, User Instructions

Page: 21 / 28

BX5
21
N.B.: Channels 4-5-6 can be paired up and used only by activating the FRIENDS configuration.
CHANNEL 1 is typically used for the Rider-Pillion Passenger connection, however it can also be used
for the Bike-to-Bike intercom.
The use of CHANNEL 1 is different from the other channels due to the following specific characteristics:

By pressing key "
n
", the intercom connection is automatically activated.

The Phone Conference function and the GPS Conference function can be used.
12.2. Bike to bike intercom function
How the Bike-to-Bike call works (Standard Configuration)
Connection CHANNEL 1 Briefly press “
n
”.
Call CHANNEL 2 Press the “
n
” key twice.
Call CHANNEL 3 Press the “
n
” key three times.
Disconnection of active intercom Briefly press “
n
”.
Con FRIENDS CONFIGURATION active:
Call CHANNEL 4 Briefly press “
on
”.
Call CHANNEL 5 Press the “
on
” key twice.
Call CHANNEL 6 Press the “
on
” key three times.
Disconnection of active intercom Briefly press “
n
”.
N.B.:
In case the memory setting is empty, or the other helmet cannot be reached, an error tone will
sound in your helmet.
Taking a Bike to Bike call
Four calling tones will sound in the helmet receiving the Bike-to-Bike call (channel 2-6), and all open
audio functions will be temporarily cut off (including the Rider – Pillion Passenger intercom, if any).
Answering a Bike to Bike phone call Briefly press any key when you hear the incoming call signal.

In case you take the call, communication is automatically established.

In case the call is not answered, the system returns to the situation prior to receiving the call.