NB-205QM/205QMC(Ver. 1) 5/17
The product requires the distance of at least 50 cm from the wall for well ventilation.
(When ventilation works well, you will use the product satisfyingly regarding a cooling ability and a heat.)
Install the product at a flat and solid place
(If the ground is not flat, it causes a vibration of the product.)
When you move the product, you must hold up the product.
(Pushing or pulling the product can damage the bottom part of the product.)
When the movement of the product is required, please tie up the door and other movable part with a tape.
(Able to get an injury by opening door and get a damage of the product.)
1.3. Precaution for use
Trained and authorized technical service engineer is required to disassemble, fix and remodel the product.
Be careful to use inflammable substances such as benzene, thinner, alcohol and LP gas near incubator.
To prevent water and experiment material from going into the control panel during the experiment, make sure to
clean the control panel with a dry towel.
(
It can cause a fire and an explosion
.)
Do not disassemble the shaker when the incubator or shaker is operating.
Do not wash the product with excessive quantity of water, thinner, benzene and Petroleum.
(It can cause an electric leakage, and malfunction or damage of the surface.)
When you don't use the product or clean it, please pull out the power plug.
(It is to prevent an electic leakage.)
Open and close the door softly and please use a door knob.
(A heavy shock can damage the product and breakdown the operating part. Also your hands can be stuck between the
door and body.)
Do not detach the built-in lamp and electrical devices.
(It can cause an electric shock and a fire.)
Be sure to prevent foreign substances from getting into the sealing silicon of the door.
(The inflow of open air can cause high fluctation in temperature of chamber and discoloration of the packing part by a
foreign substance.)
