background image

2 years on spa plumbing: Spa fittings and plumbing are warranted against leaks due to de-

fects in materials or workmanship for two years from the original date of delivery. There is no 

labour coverage on internal jet parts replacement, cleaning or adjusting. 

2 years on standard and optional spa equipment – Balboa Control Systems, Jet Pump(s), 

Laing Circulation Pump, Heater, Wi-Fi module, IR receiver: The spa equipment systems are 

warranted against failure due to defects in materials or workmanship for two years from the 

date of delivery. Fuses, bulbs, and seals are not covered.

2 years on Pulsar hydrotherapy system: The factory installed Pulsar hydrotherapy systems are 

warranted against failure due to defects in materials or workmanship for one year from the 

original date of delivery.

2 years on spa cabinets/skirts: The factory installed spa cabinets/skirts are warranted against 

failure due to defects in materials or workmanship for one year from the original date of 

delivery.

2 years on ozone generator: The ozone generator is warranted against failure due to defects 

in materials or workmanship for one year from the original date of delivery.

2 years on audio system components: The factory installed audio components (i.e. power 

supply, speakers, wires, etc.) are warranted against failure due to defects in materials or work-

manship for one year from the original date of delivery. There is no in-field labour service on 

these items.

2 years on LED lights: The factory installed LED lights are warranted against failure due to 

defects in materials or workmanship for one year from the original date of delivery.

2 years on UV-C sanitizer lamp: The factory installed UV-C sanitizer lamps are warranted 

against failure due to defects in materials or workmanship for one year from the original date 

of delivery.

2 years on I.S.I.S. water disinfection system: The factory installed I.S.I.S. water disinfection sys-

tems are warranted against failure due to defects in materials or workmanship for one year 

from the original date of delivery.

1 year on blower: The blower is warranted against failure due to defects in materials or work-

manship for one year from the original date of delivery.

1 year on thermo cover: The thermo cover is warranted against failure due to defects in mate-

rials or workmanship for one year from the original date of delivery.

1 year on WELLIS Spa Umbrella: The factory installed WELLIS Spa Umbrellas are warranted 

against failure due to defects in materials or workmanship for one year from the original date 

of delivery.

1 year on LCD TV system: The factory installed LCD TV systems are warranted against failure 

due to defects in materials or workmanship for one year from the original date of delivery.

90 days on skimmer house: Skimmer houses are subject to water chemistry variation and 

are warranted for ninety days from the original date of delivery. NO warranty on filters, spa 

pillows and skimmer house tops.

Summary of Contents for SATURN WM00177












































Reviews: