CLEANING
GENERAL INFORMATION:
Water recirculation-filtering
The basic conditions for keeping the water of the spa clean are the removal of mechanical
dirt and the blending of the chemicals in the water with continuous water recirculation.
In all our spa’s appliances comprising of a pump and a filter are used for this purpose.
- The filter removes the dirt floating in the water or at the surface of the water. Filters with
paper or textile filter medium are used in the spa. The dirt settled at the bottom of the spa is
filtered out with the aid of the suction and stirring created by the massage pumps.
Protecting the spa
Don’t leave the spa expose to the sun without water or the cover. Exposure to direct sunlight
can cause solar distress of the shell material. Use a spa cover when spa is not in use, whether
it is empty or full. Try to keep your spa away from rain and snow. If possible, build a gazebo
for your spa.
1. Don’t attempt to open the electrical control box. There are no user serviceable parts
inside.
2. Drain, clean and refill your spa with fresh water on a regular schedule.
3. Clean the filter cartridge at least once a month.
4. Have spa users bathe before entering the spa water, showering without soap prior to
enter the spa, and using only the rinse cycle when laundering your bathing suit, will
help avoiding detergent and soap residue in spa water.
FILTER CARTRIDGE RMOVAL AND CLEANING
you spa filter cartridge can become clogged with mineral particles of calcification from hard
water. Which may result in reduced water flow. We recommend to clean the filter cartridges
every month.
1. Remove filter grid.
2. Unscrew filter cartridge.
3. Clean with high pressure nozzle to remove all debris that clinging the filter.
4. Soak filter in warm water and WELLIS Alga Shock to remove all body oils and grime.
Never use chlorine to clean the filter!
