Monitor Events in Full-On Mode
PM Events include:
•
Local Master
•
Local Device
•
Video Activities
•
DMA Activities
•
IRQ1 through IRQ15
The IRQ8 (RTC, OS2) default setting is disabled in order to make sure that
the Power Management mode can be executed under OS2. You can
customize a combination of PM events by selecting “Enable”, which will be
checked whether or not the related function is still working before the
respective defined power management mode is asked to be motivated.
IRQ 15 (Reserved) event will only be available if Intel SL-Enhanced
series CPU is installed.
The default setting of IRQ 8(RTC, OS2) event is “Disable” in order to
make sure the Power Management mode can be executed under OS2.
You can define a personalized combination of PM Events by selecting
“Enable” which will be checked to determine if the related function is
still working before the defined power management mode is asked to be
motivated.
PM Control by APM
Yes
No
If APM (Advanced Power Management) is installed, the system
BIOS will wait for APM's prompt before entering any PM mode
(Doze, Standby, Suspend, User Defined). Selecting “Yes” means that
the PM mode will not be executed until all application software
under the OS stops running. Selecting “No” causes the PM mode to
be executed when the respective timer(s) time out.
4-12
Manual No. 771924-D03, Mar. 1995
MGI486 System Board User's Guide
