and cause a warning message to appear. If this happens, you can
either allow the operation to continue or stop it.
Cache Control
CPU Internal Cache:
Disabled
Enabled
External Cache:
Disabled
Enabled
Boot Up Features
Boot Sequence:
A,C
C,A
This selects the drive for the system to search first for boot data. If
your system boots from the hard disk, you should select to search it
first and eliminate the time spent searching for the data in drive A.
Swap Floppy Drive:
Disabled
Enabled
Enabling this feature swaps the floppy drive assignment so that
drive A will function as drive B, and drive B will function as
drive A.
Boot Up Floppy Seek:
Disabled
Enabled
During POST Procedure, the BIOS will determine if the installed floppy
disk drive is 40 or 80 tracks (360KB is 40 tracks; 760KB, 1.2MB and
1.44MB are all 80 tracks). If this function is enabled, there will be a
warning message when a 360K floppy drive is installed.
Boot Up NumLock Status:
On
Off
ON: Keypad is set to number-mode keys following.
Off: Keypad is set to arrow-mode Keys.
Boot Up System Speed:
High
Low
If set to high speed, the system will run at high speed immediately
after power on.
4-4
Manual No. 771924-D03, Mar. 1995
MGI486 System Board User's Guide
