MYLAPS BibTag Timing system V.30. ENG. November 2020
© MYLAPS rights reserved 27
9.
Antennas
The array of antenna mats currently installed to the decoder:
Enabled and detected mats are shown as an open rectangle
Mats activated by a chip are shown as a filled rectangle
Enabled mats that are not detecting are shown as a blinking X
Antenna connectors with no mat connections are shown as -
Antenna connectors shown as a dashed rectangle cannot be detected (this also signifies the
decoder is in scanner mode)
10. Used
memory
This bar represents the capacity and the number of passings in the MYLAPS BibTag Decoder. It
shows the stored passings versus the maximum amount of passings that can be stored
94.000).
CAUTION
The bar will start flashing after 75% of the total capacity (total capacity is at least ninety thousand) has been reached, to
indicate you need to clear your BibTag decoder to prevent you from losing detections.
NOTE
The backlighting for the screen will flicker if there is an error present.