MYLAPS BibTag Timing system V.30. ENG. November 2020
© MYLAPS rights reserved 32
8.1.2. Timeline set up
Use the
and
buttons to navigate to the menu and submenus
Menu
Submenu
•
Profile
➢
Main
➢
Back up
➢
Scanner
•
Number of antennas
•
Reader channel
➢
Not for FCC/USA
•
Beep
➢
Beep volume
➢
Beep type
•
Time between same chip
•
Continuous mode
Choose here to assign:
•
Profile
•
Number of antennas
•
Reader channel *
•
Beep
•
Time between same chip
•
Continuous mode
*
Reader channel is not available for USA/FCC systems
Profile:
Choose Timeline > Profile
Here you can assign whether your decoder is used as
a main or backup system, or as a scanner.
Main and backup systems are set up in two rows at a
recommended distance of 3m (10ft) from each other
Main and backup decoders are mostly used at
start/finish lines to guarantee accuracy and ensure
that all chip times are registered.
A scanner assigned decoder can be used to check bibtags (never use this setting when the decoder is used
in a race). The first array of mats that is passed is normally
as backup. The backup system has less precise timing but is more sensitive for weak chip signals.
Change the selection as follows:
•
Press
to choose the required setting (Main, Backup or Scanner).
•
Press
to move to the next field.
•
Press
selection).
