There are invalid Vid-in and Vid-out marks on the TeleFlyOSD PCB of some batches. The
above description shall prevail.
Purpose of the three buttons numbered 3, 4 and 5 in the picture:
Part #
Name
用途
3
UP Button
Select the previous item
4
SET Button
Enter a menu list
，
Or change the current item
5
DOWN Button
Select the next item
If the system is connected properly, you can see the following pictures on the video monitor
after the TeleFlyOSD is started.
The reading meaning of various parts in the picture has been marked.
Each time you press the “SetHome” button, the flying time is reset to 0.
Before you press the “SetHome” button, the distance to home is not available and displayed
as N.A.
By pressing the “UP” switch, you can enter to view the GPS status data interface.
By pressing the “DOWN” switch, you can enter the interface without OSD data displayed.
By pressing the “SET” switch, you can enter the following interface of system options:
Summary of Contents for AAT
