MyFlyDream AAT, Manual

Page: 15 / 30

After take down the left panel you will see there are 7 soldering pad on the PCB. They
are numbered from 1 to 7.
A 6 channels tracker has only a 6 pin plug. The Aux Channel 1 maps to PIN#3 of the
plug.
A 12 channels tracker has a 6 pin plug and a 7 pin plug. The 6Pin plug is used to connect
to AATDriver. PIN#3 of the 6 pin plug is a null pin. The Aux Channel 1 to 7 map to PIN#1 to
PIN#7 of the 7pin plug.
CAUTION: The maximum current allowed for each channel is 2A. Don’t exceed this limit
or the slip ring will be damaged.

Setup and operation of the AATDriver
Common functions and operations of the AATDriver:
Function How to operate Remark
Toggle between MFD
mode and VGPS mode
Hold down
the HOME button to
power on
After power on, the yellow LED or the
red LED of AATDriver will blink rapidly.
The rapid blink of the yellow LED indicates
that the current mode is VGPS mode, the
blinking red one indicates the MFD mode.