21
Section 14 ~
important safety warnings
When using the
myerson
Flexpress
™ Digital Injection System,
always follow basic safety precautions to reduce the risk of
accidental injury due to burns or electrical shock.
Wear long sleeves, long pants, heat-resistant gloves, and safety
goggles when using the unit. Do not expose heat-resistant gloves
to hot metal areas for extended periods of time.
Keep out of the reach of children. Do not place unit where cord
can be tripped over. Keep unit away from flammable material.
It is normal for the unit to become quite warm during use.
Do not leave unit unattended with the power on
.
The
myerson
Flexpress
™ Digital Injection System is for indoor use
only. Do not use outdoors or in wet or damp locations. Never immerse
unit in water or other liquids. Use only on a clean, dry work surface.
Excessive dust and dirt will reduce the life of the unit.
Use only recommended accessories and materials with this unit.
Using materials other than those recommended by
myerson, LLC
may result in accidental injury and permanent damage to the unit.
When not in use, unit should be stored in a dry secure location out
of the reach of children.
Manufacturer assumes no responsibility for consequential or indirect
damages from the use of this product.
Use this product only as specified in this manual. Using this device
in a manor not specified may result in injury or hazards.
WARNING
Do not turn off power when cooling fan is running.