MYERSON FlexPress, Instruction Manual, Page: 12 / 24

13. Place the flask onto the
myerson Flexpress
™, centering the sprue
hole of the flask over the center of the heating chamber. Lock the
flask in place using the flask strap and knobs.
14. When the timer expires, the
myerson Flexpress
™ will automatically
inject the
myerson DuraFlex
cartridge. The piston will stay in the up
position according to the hold time. Once the piston retracts, it is
safe to unscrew the hold down plate and remove the flask.
15. To remove the flask, loosen the hold down knobs and remove the
flask strap. Using heat resistant gloves, grasp the flask and press
the
EXTEND/RETRACT
button (lower right button). This will extend
the piston and push the crushed cartridge and flask out.
16. Press the
EXTEND/RETRACT
button again to retract the piston.
The
myerson Flexpress
™ is now ready for another injection.
17. After the appliance is divested, it can be placed in a stone remover
to eliminate any extra stone that is adhering to the appliance.
Notice how the Thermoplastic Model Separator
MS-0200
has
created a smooth, clean surface on the underside of the appliance.
12