Operation
Display
Import / Export Power
The power being either imported or exported from or to the grid (kW). The
direction of the arrows indicate if the property is currently importing power
(left) or exporting power (right)
The size of arrows is proportion to the level of power. When the property is
neither importing or exporting power, the figure will be 0.0kW and there will no
animated arrows. The property is then said to be 'in balance'
House Load Power
The power that the property is currently using in kW
It does not include any surplus power being sent to the heater(s)
Note: This is displayed only when the Generation Sensor is installed (either connected to CT2 input
or a
harvi
device)
Operating Mode
The current operating mode is displayed here (see
Operating Modes
page 10)
Generation Power
The power being generated at this time in kW
Note: This is displayed only when the Generation Sensor is installed (either connected to CT2 input
or a
harvi
device)
Message Icon
When this icon is present there is a message from the
myenergi
server
This only applies if you have the
myenergi hub
device
Date & Time
The current date and time
Status Icons
These icons indicate that the import limiting is active (house), a relay is on (R1 /
R2) or the e-Sense input is live (e)
eddi
Icon
This
eddi
unit. If there are wavy lines above the icon, the unit is thermally
limiting (the output power will be temporarily reduced)
Energy Diverted Today
The accumulated energy that has been sent to heater(s) today
Only the surplus energy is included
Temperature
If the optional Relay & Sensor Board (see page 28)is fitted and temperature
probes are installed, the temperature of the active heater is displayed
Heater Icon
This icon represents the active heater, and next to it is the heater number
Power Diverting to Heater
When
eddi
is heating, arrows will show here along with the power in kW
8
eddi
operation and installation manual
4
2
1
11
6
7
5
10
9
8
12
3
1
2
3
4
5
6
7
8
9
11
12
10