Installation
Installation
Mounting
•
eddi
is NOT suitable for installation outdoors.
•
Ensure the device always has adequate ventilation; do not block the vents or obstruct the airflow at the back of
the unit.
•
eddi
must be fixed to a vertical surface
The
eddi
needs to be securely mounted to a wall using the dedicated mounting bracket which comes attached to the unit.
1. With the unit on its back on a flat surface, remove the front cover by unscrewing the two screws
1
and lifting it off.
2. Loosen the two mounting bracket securing screws
2
and separate the bracket
3
from the
eddi
.
3. Offer the bracket up to the wall and mark the holes for drilling. If fixing to a timber stud wall, you can use the two
central vertically aligned fixing points to screw the bracket directly into the timber.
Clearances
operation and installation manual
eddi
23
2
1
1
150
150
20
20
mm
2
3
1
1