7
Programming
The MYE MWC-9 receiver must be programmed to detect and lock in the MYE
Entertainment transmitters as well as the other brands of transmitters listed below. The
MWC-9 features both “auto” and “manual” program modes. In the auto mode the MWC-9
will automatically search for and program in your transmitters. The manual mode provides
the ability to add or erase a specific transmitter channel or unwanted frequency caused by
spurious emissions or other local elements.
Auto Program Mode
1. Press Channel Down and Volume UP buttons simultaneously for three seconds until
“P-1” appears on the display.
2. Press the “>>” OR “<<” buttons to select one of the following program modes:
P-1 = MYE Entertainment 900MHz Transmitters
P-2 = Cardio Theater LCS 900MHz Transmitters
P-3 = Cardio Theater / Enercise xTV 900MHz Transmitters
P-4 = BroadcastVision 900MHz Transmitters
3. After selecting the Transmitter Mode, press the Play button to auto-scan and lock
transmitters.
4. Press the Channel UP or Channel Down buttons to determine all transmitters have
been locked in. NOTE: “PRESET” will appear in the display when a transmitter
channel is programmed.
5. To exit program mode press the EQ button. The display will blink briefly and the will
default to first transmitter channel programmed.
Manual Program Mode (Add or Delete Frequencies)
1. Press Channel Down and Volume UP buttons simultaneously for three seconds until
“P-1” appears on the display.
2. Press the “>>” OR “<<” buttons to select one of the following transmitter program
modes listed above.
3. Press the EQ button
4. Press CHANNEL UP/DOWN buttons to scroll through all transmitter channels.
5. To add or delete a transmitter channel press the “TV” button. NOTE: “PRESET” will
appear in the display when a transmitter channel is programmed.
6. To exit manual program mode press the EQ button. The display will blink briefly and
twill default to first transmitter channel programmed.
