8
Atta
ching the Controller
1. Remove the rear mounting cup from the controller by loosening the two screws and
opening both metal latches on the back of the controller
2. Attach the rear mounting cup to the desired mounting location by either using the
secure clamp or traditional nylon wire ties. Secure Clamp- Insert screws (included)
3. Insert the Control power cable or CSAFE cable through the square opening of the
rear mounting cup. (PIC 3)
4. Connect the cable to the data port on the rear of the MYE Controller
5. Plug the power supply to an AC outlet or the CSAFE cable to an active CSAFE port.
6. Rotate the MYE Controller so it is vertical and position on the rear mounting cup
7. Lock the Controller in place by securing both metal clamps and tightening screws.
Shallow Cup with Secure Lock Mounting
PIC 3
Shallow Cup with Nylon Wire Tie Mounting
When CSAFE cables are required for power, USE only MYE Entertainment CSAFE cables with all
MYE Entertainment receiver controllers (900 MHz or FM). MYE Entertainment will not be
responsible for damage to controllers or CVE when alternate or other brand cables are used.