6
Programming - Far/Near Reception
This feature provides the ability to set the reception sensitivity of each MYE MWC-9 receiver
depending on the proximity between the receiver and transmitter.
Far Mode: (Default): The far mode is the most widely used and will accommodate the
majority of installations.
Near Mode: The near mode is used primarily in situations where the MWC-9 receiver is
positioned very close to one or more transmitters. The Near Mode is recommended when
receivers are installed between 1 and 5 feet from a transmitter.
Far / Near Mode
Note: The factory default is set to “Far” (HI).
To change to “Near” mode (LO):
1. Start with the MWC-9 in the OFF position.
2. With the unit OFF, press and hold the Volume UP button.
3. While holding the Volume UP button, press and release the POWER button.
4. Wait three seconds while continuing to hold Volume UP button until ‘LO’ is appears
on the display.
5. To revert back to Far mode simply follow steps 1-4 until “HI” appears on display.
DISPLY
and
ICON IDENTIFICATION
FAULTY
HEADPHONE
JACK
VOLUME
LEVEL
INDICATOR
CHANNEL
FITP3 MODE
SELECTED
CURRENT
CHANNEL
TRANSMITTER
TV MODE
SELECTED
MUTE “ON”
EQ PRESETS
FREQUENCY
DETECTED IN
AUTO PROGRAM
MODE
