9
IntelliJack - Self Diagnostic Headphone Jack
The IntelliJack self diagnostic headphone circuit detects when the headphone jack has
failed or been damaged. When a faulty headphone jack is detected, a flashing “headphone”
icon appears in the LCD display. It will remain on until a new jack is installed and the icon
reset.
To Replace the Intellijack:
1. Loosen the two screws evenly on the bottom of the IntelliJack module and remove.
2. Carefully insert new IntelliJack module without bending contact pins.
3. Reset the Icon. Turn MYE Controller OFF then press and hold the “Power” button for
3-4 seconds. When the icon appears again release the Power button.
IMPORTANT NOTICE:
Faulty headphones may trigger the fault headphone jack icon. It is
important to audibly test the headphone jack prior to replacement. If the headphone jack is
deemed OK simply follow step #3 above to reset the faulty headphone jack.
